ISO 9001 in place: how much of it counts towards ISO 42001?
If you run a QM system to ISO 9001, you already have most of the structure for ISO 42001. What you reuse, what is new, and where the trap lies.
In short
Clauses 4 to 10 are built the same way in both standards: context, leadership, planning, support, operation, evaluation, improvement. Anyone who runs ISO 9001 continues to use this structure. What is new in ISO/IEC 42001 is above all the AI risk assessment, the risk treatment, the impact assessment and the whole of Annex A.
Auf Deutsch lesen: deutsche Fassung
Update of 10 November 2026. This article compares with ISO 9001:2015. ISO 9001:2026 has applied since September 2026, and there clause 10 is numbered exactly as in ISO/IEC 42001: 10.1 Continual improvement, 10.2 Nonconformity and corrective action. The trap described below therefore now only affects documents that refer to 10.3 of the 2015 edition. Those are exactly the ones you should find during the transition. I am leaving the text as it is and writing the current status above it.
The question almost always comes from quality management, and it comes with a certain mistrust: we have had a QM system to ISO 9001 for years, and now we are supposed to build a second management system because of AI? The honest answer is more reassuring than most expect. You are not building a second system. You are extending the existing one. And considerably further than it looks at first glance.
I am not saying this to make the start sound easier than it is. There is a sober reason for it, and it lies in the way modern ISO standards are built. Anyone who knows it plans the effort correctly and does not argue about the wrong items in the steering committee.
The good news is in the structure
Modern ISO management system standards follow a common basic structure. That is why clauses 4 to 10 in ISO 9001 and in ISO/IEC 42001 are related in content and, on top of that, numbered the same and named the same. I put the two standards side by side for this.
| Clause | ISO 9001:2015 | ISO/IEC 42001:2023 |
|---|---|---|
| 4 | Context of the organization | Context of the organization |
| 5 | Leadership | Leadership |
| 5.2 | Policy | AI policy |
| 5.3 | Roles, responsibilities and authorities | Roles, responsibilities and authorities |
| 6 | Planning | Planning |
| 6.3 | Planning of changes | Planning of changes |
| 7 | Support | Support |
| 7.2 / 7.3 | Competence, awareness | Competence, awareness |
| 7.5 | Documented information | Documented information |
| 8 | Operation | Operation |
| 9.2 / 9.3 | Internal audit, management review | Internal audit, management review |
| 10 | Improvement | Improvement |
This is not a coincidence and not a marketing claim by the certification bodies. It is the reason an integrated management system works at all. Anyone who has built their document control, their audit programme and their management review properly once only widens the scope for the second standard.
What you reuse unchanged
In concrete terms: these procedures already exist in your company, they only need an extended field of application and a few additional entries.
- Determining context and interested parties. You add the parties affected by your AI systems and the legal requirements from the EU AI Act.
- Leadership commitment and policy. Alongside the quality policy there will be an AI policy. Both can be approved, controlled and reviewed in the same scheme.
- Roles, responsibilities and authorities. You will not get around new roles, but you govern them in the existing procedure.
- Competence and awareness. Your training matrix gains rows, not a second life in a file of its own.
- Control of documented information under 7.5. Same rules, same approvals, same versioning.
- Internal audit and management review. One audit programme, one audit plan, one management review with one additional agenda item.
- Handling nonconformities and corrective actions. Your CAPA process carries AI findings as well.
When I sit in a gap analysis and the QM system is properly run, this whole block is ticked off within a few hours. Not because I am generous, but because the evidence really is there. It just has a different name.
An example to make it tangible. In the internal audit I do not ask whether you have an AI audit programme. I ask whether your existing audit programme carries the AI topics in the plan, who audits them and whether that person is competent to do so. In the management review I check whether AI was an agenda item of its own and whether anything was decided there. Both are questions to an existing procedure, not to a new one. Anyone who already has a living system has to build almost nothing for this, but has to take something into it.
The only place where this regularly snags is the competence of the internal auditors. An experienced QM auditor can audit a management system, but the question of whether an impact assessment holds up technically or whether a model change was controlled correctly is a different one. That is not a reason for a second auditor, but it is a reason for targeted qualification. And it is exactly the point at which a certification body will ask later.
The effort of an ISO 42001 implementation is rarely decided by the standard. It is decided by how well the existing management system is really lived.
Where ISO 42001 goes beyond ISO 9001
Now the part that should not be talked away. In clause 8, that is, in operation, the two standards part ways clearly. ISO 9001 governs production and service provision there, the requirements for products, release and the control of nonconforming outputs. ISO/IEC 42001 instead carries three items there for which the QM system has no counterpart.
- 8.2 AI risk assessment. The assessment under 6.1.2 is carried out recurrently for the AI systems, which ISO 9001 does not know in this form.
- 8.3 AI risk treatment. The risk treatment plan is implemented and checked for effectiveness. Which controls from Annex A you apply and which you exclude with justification is determined beforehand under 6.1.3.
- 8.4 AI system impact assessment. The consideration of effects on individuals and groups, and that is not provided for in QM thinking.
Then comes the larger piece: Annex A. ISO 9001 has nothing like it. ISO/IEC 42001 lists controls there in groups from A.2 to A.10, from the AI policy through resources, impact assessment, life cycle, data and information for users to third-party and customer relationships. With it comes a Statement of Applicability in which you apply or exclude each control with justification.
That is the real new build. Anyone who says ISO 42001 is just 9001 with an AI label has not read Annex A.
So that you can gauge the extent: the control groups range from the policies through internal organisation, resources and impact assessment to the life cycle of the AI system, the data, the information for users, responsible use and third-party and customer relationships. Some of this touches your QM system, for example resources and responsibilities. Other parts simply have no counterpart there, for example the provenance of the training data or the question of what information a user receives about the limits of the system.
One more widespread misunderstanding: the general risk approach from clause 6.1, which you know from ISO 9001, does not replace the AI risk assessment from 8.2. The one asks which risks and opportunities influence the achievement of the objectives of your management system. The other assesses individual AI systems, recurrently, with a defined procedure. Anyone who tries to present the one as evidence of the other gets a follow-up question in the audit that cannot be argued away.
The trap that snaps shut when you map by numbers
Because the structure is so largely the same, it tempts you to map mechanically by numbers. In one place that goes wrong, and I found it when reading both standards again: clause 10 is not numbered identically.
| Number | ISO 9001:2015 | ISO/IEC 42001:2023 |
|---|---|---|
| 10.1 | General | Continual improvement |
| 10.2 | Nonconformity and corrective action | Nonconformity and corrective action |
| 10.3 | Continual improvement | does not exist |
Anyone who refers to “10.3 Continual improvement” in their procedure and believes this applies to both standards is citing thin air as far as ISO 42001 is concerned. That is not hair-splitting: in the audit you are asked for the reference, and a reference that does not exist is a finding. So check with every cross-reference whether you mean the number or the subject. If in doubt, name the subject and add the number per standard.
How I set this up in practice
The order that has proved itself for me costs surprisingly little time in a well-run QM system.
- Scope first. Which AI systems are in, which are deliberately out, and why. Without this determination every subsequent question becomes arbitrary.
- Inventory of the AI applications. Including the ones nobody has registered. Experience shows that the first surprise lies here.
- Clarify roles. Are you the provider or the deployer of this system within the meaning of the EU AI Act? Your obligations depend on it.
- Extend existing procedures instead of duplicating them. One document control procedure, one audit programme, one management review.
- Only then go through Annex A and build the Statement of Applicability. That is the part you really need time for.
What I do not recommend: keeping two manuals in parallel. It looks tidy and becomes a source of errors after a year, because one of the two versions is always the older one. One system, several scopes.
On effort I deliberately give no flat figure, because it would be wrong for your organisation. What I can say, though: the distribution is lopsided. The structural part, that is, everything you bring with you from 9001, is the smaller item. The AI-specific part from clause 8 and Annex A is the larger one, and it depends almost entirely on how many AI systems you actually have in scope. Two applications are a manageable project. Twenty are a different one.
That is why the inventory is not the tiresome first step, but the one that determines your effort. And it regularly brings things to light that nobody has registered: a translation tool in sales, an assistant in quotation preparation, an image recognition system in the inspection cell that has been running alongside for two years. None of that is forbidden. But what you do not know, you can neither assess nor control.
One last practical piece of advice on the order in the calendar. Put the first management review with an AI item in the middle of the project. Then you see early whether top management really takes the decisions the system requires of it, or whether it merely takes note of the item. That is the most frequent silent deficiency in young management systems, and it reliably shows up in certification.
If you want to know how far your existing QM system already carries you towards ISO 42001, a gap analysis is the fastest way to a reliable answer.
Go to the AI readiness checkA closing word on expectations. I regularly tell companies with a living QM system that they are further along than they think, and I mean it. But the shortcut lies in the structure, not in the content. No quality management, however good, takes the AI-specific requirements off your hands, that is, risk assessment, impact assessment and Annex A. Anyone who understands that plans realistically and is not surprised in the audit.
Primary sources
Frequently asked questions
Can I integrate ISO 42001 into my existing QM system?+
Yes, and that is the recommended route. Clauses 4 to 10 are built the same way in both standards. You run document control, internal audit, management review and corrective actions once and extend the scope.
What can I NOT reuse from ISO 9001?+
Above all the AI-specific parts: the AI risk assessment and risk treatment, the AI system impact assessment and the whole of Annex A with the Statement of Applicability. ISO 9001 has no counterpart for these.
Are the clause numbers of the two standards identical?+
Since ISO 9001:2026, yes, including clause 10: 10.1 Continual improvement, 10.2 Nonconformity and corrective action. In the 2015 edition, continual improvement was still under 10.3. Anyone who refers to 10.3 in old procedures is today citing thin air in both standards.
Do I need two manuals?+
No. Two parallel manuals look tidy and become a source of errors after a year, because one version is always the older one. One system with several scopes is more stable.
Author & expert review: Lars Zimmermann · ISO/IEC 42001 Senior Lead Auditor & Senior Lead Implementer · ISO/IEC 27001 Lead Auditor & Lead Implementer (PECB)
Last updated: 10 November 2026. Researched and reviewed to the best of our knowledge; not a substitute for individual legal advice.
Questions about your own case?
In a free 15-minute intro call we assess where you stand on ISO 42001, ISO 27001 and the EU AI Act, honestly and without a sales pitch.